Tag: Cyclostationarity

A Challenge for the Machine Learners

The machine-learning modulation-recognition community consistently claims vastly superior performance to anything that has come before. Let’s test that.

Update September 2023: A randomization flaw has been found and fixed for CSPB.ML.2018, resulting in CSPB.ML.2018R2. Use that one going forward.

Update February 2023: A third dataset has been posted here. This new dataset, CSPB.ML.2023, features cochannel signals.

Update April 2022: I’ve also posted a second dataset here. This new dataset is similar to the original ML Challenge dataset except the random variable representing the carrier frequency offset has a slightly different distribution.

If you refer to any of the posted datasets in a published paper, please use the following designators, which I am also using in papers I’m attempting to publish:

Original ML Challenge Dataset: CSPB.ML.2018.

Shifted ML Challenge Dataset: CSPB.ML.2022.

Cochannel ML Dataset: CSPB.ML.2023.

Update February 2019

I’ve decided to post the data set I discuss here to the CSP Blog for all interested parties to use. See the new post on the Data Set. If you do use it, please let me and the CSP Blog readers know how you fared with your experiments in the Comments section of either post. Thanks!

Continue reading “A Challenge for the Machine Learners”

CSP Estimators: The FFT Accumulation Method

An alternative to the strip spectral correlation analyzer.

Let’s look at another spectral correlation function estimator: the FFT Accumulation Method (FAM). This estimator is in the time-smoothing category, is exhaustive in that it is designed to compute estimates of the spectral correlation function over its entire principal domain, and is efficient, so that it is a competitor to the Strip Spectral Correlation Analyzer (SSCA) method. I implemented my version of the FAM by using the paper by Roberts et al (The Literature [R4]). If you follow the equations closely, you can successfully implement the estimator from that paper. The tricky part, as with the SSCA, is correctly associating the outputs of the coded equations to their proper \displaystyle (f, \alpha) values.

Continue reading “CSP Estimators: The FFT Accumulation Method”

Computational Costs for Spectral Correlation Estimators

The costs strongly depend on whether you have prior cycle-frequency information or not.

Let’s look at the computational costs for spectral-correlation analysis using the three main estimators I’ve previously described on the CSP Blog: the frequency-smoothing method (FSM), the time-smoothing method (TSM), and the strip spectral correlation analyzer (SSCA).

We’ll see that the FSM and TSM are the low-cost options when estimating the spectral correlation function for a few cycle frequencies and that the SSCA is the low-cost option when estimating the spectral correlation function for many cycle frequencies. That is, the TSM and FSM are good options for directed analysis using prior information (values of cycle frequencies) and the SSCA is a good option for exhaustive blind analysis, for which there is no prior information available.

Continue reading “Computational Costs for Spectral Correlation Estimators”

CSP Patent: Tunneling

Tunneling == Purposeful severe undersampling of wideband communication signals. If some of the cyclostationarity property remains, we can exploit it at a lower cost.

My colleague Dr. Apurva Mody (of BAE Systems, AiRANACULUS, IEEE 802.22, and the WhiteSpace Alliance) and I have received a patent on a CSP-related invention we call tunneling. The US Patent is 9,755,869 and you can read it here or download it here. We’ve got a journal paper in review and a 2013 MILCOM conference paper (My Papers [38]) that discuss and illustrate the involved ideas. I’m also working on a CSP Blog post on the topic.

Update December 28, 2017: Our Tunneling journal paper has been accepted for publication in the journal IEEE Transactions on Cognitive Communications and Networking. You can download the pre-publication version here.

Continue reading “CSP Patent: Tunneling”

Resolution in Time, Frequency, and Cycle Frequency for CSP Estimators

Unlike conventional spectrum analysis for stationary signals, CSP has three kinds of resolutions that must be considered in all CSP applications, not just two.

In this post, we look at the ability of various CSP estimators to distinguish cycle frequencies, temporal changes in cyclostationarity, and spectral features. These abilities are quantified by the resolution properties of CSP estimators.

Resolution Parameters in CSP: Preview

Consider performing some CSP estimation task, such as using the frequency-smoothing method, time-smoothing method, or strip spectral correlation analyzer method of estimating the spectral correlation function. The estimate employs T seconds of data.

Then the temporal resolution \Delta t of the estimate is approximately T, the cycle-frequency resolution \Delta \alpha is about 1/T, and the spectral resolution \Delta f depends strongly on the particular estimator and its parameters. The resolution product \Delta f \Delta t was discussed in this post. The fundamental result for the resolution product is that it must be very much larger than unity in order to obtain an SCF estimate with low variance.

Continue reading “Resolution in Time, Frequency, and Cycle Frequency for CSP Estimators”

CSP Estimators: Cyclic Temporal Moments and Cumulants

How do we efficiently estimate higher-order cyclic cumulants? The basic answer is first estimate cyclic moments, then combine using the moments-to-cumulants formula.

In this post we discuss ways of estimating n-th order cyclic temporal moment and cumulant functions. Recall that for n=2, cyclic moments and cyclic cumulants are usually identical. They differ when the signal contains one or more finite-strength additive sine-wave components. In the common case when such components are absent (as in our recurring numerical example involving rectangular-pulse BPSK), they are equal and they are also equal to the conventional cyclic autocorrelation function provided the delay vector is chosen appropriately. That is, the two-dimensional delay vector \boldsymbol{\tau} = [\tau_1\ \ \tau_2] is set equal to [\tau/2\ \ -\tau/2].

The more interesting case is when the order n is greater than two. Most communication signal models possess odd-order moments and cumulants that are identically zero, so the first non-trivial order n greater than two is four. Our estimation task is to estimate n-th order temporal moment and cumulant functions for n \ge 4 using a sampled-data record of length T.

Continue reading “CSP Estimators: Cyclic Temporal Moments and Cumulants”

CSP Blog Highlights

Welcome to the CSP Blog!

To help new readers, I’m supplying here links to the posts that have gotten the most attention over the lifetime of the Blog. Omitted from this list are the more esoteric topics as well as most of the posts that comment on the engineering literature.

Click the button below to follow the CSP Blog:

Follow Cyclostationary Signal Processing on WordPress.com

Use this button to donate to the CSP Blog:

Support the CSP Blog and Keep it Ad-Free

Please consider donating to the CSP Blog to keep it ad-free and to support the addition of major new features. The small box below is used to specify the number of $5 donations.

$5.00

You can see a pre-publication version of my latest CSP journal paper, on “tunneling”, here.

Here are some highlights:

Continue reading “CSP Blog Highlights”

Automatic Spectral Segmentation

Radio-frequency scene analysis is much more complex than modulation recognition. A good first step is to blindly identify the frequency intervals for which significant non-noise energy exists.

In this post, I discuss a signal-processing algorithm that has almost nothing to do with cyclostationary signal processing (CSP). Almost. The topic is automatic spectral segmentation, which I also call band-of-interest (BOI) detection. When attempting to perform automatic radio-frequency scene analysis (RFSA), we may be confronted with a data block that contains multiple signals in a number of distinct frequency subbands. Moreover, these signals may be turning on and off within the data block. To apply our cyclostationary signal processing tools effectively, we would like to isolate these signals in time and frequency to the greatest extent possible using linear time-invariant filtering (for separating in the frequency dimension) and time-gating (for separating in the time dimension). Then the isolated signal components can be processed serially using CSP.

It is very important to remember that even perfect spectral and temporal segmentation will not solve the cochannel-signal problem. It is perfectly possible that an isolated subband will contain more than one cochannel signal.

The basics of my BOI-detection approach are published in a 2007 conference paper (My Papers [32]). I’ll describe this basic approach, illustrate it with examples relevant to RFSA, and also provide a few extensions of interest, including one that relates to cyclostationary signal processing.

Continue reading “Automatic Spectral Segmentation”

Blog Notes and How to Obtain Help with Your CSP Work

The CSP Blog has been getting lots of new visitors these past few months; welcome to all!

Following the CSP Blog

If you want to receive an email each time I publish a new post, look for the Follow Blog via Email widget on the right side of the Blog and enter an email address.

Continue reading “Blog Notes and How to Obtain Help with Your CSP Work”

100-MHz Amplitude Modulation? Comments on “Sub-Nyquist Cyclostationary Detection for Cognitive Radio” by Cohen and Eldar

I came across a paper by Cohen and Eldar, researchers at the Technion in Israel. You can get the paper on the Arxiv site here. The title is “Sub-Nyquist Cyclostationary Detection for Cognitive Radio,” and the setting is spectrum sensing for cognitive radio. I have a question about the paper that I’ll ask below.

Continue reading “100-MHz Amplitude Modulation? Comments on “Sub-Nyquist Cyclostationary Detection for Cognitive Radio” by Cohen and Eldar”

The Cycle Detectors

CSP shines when the problem involves strong noise or cochannel interference. Here we look at CSP-based signal-presence detection as a function of SNR and SIR.

Let’s take a look at a class of signal-presence detectors that exploit cyclostationarity and in doing so illustrate the good things that can happen with CSP whenever cochannel interference is present, or noise models deviate from simple additive white Gaussian noise (AWGN). I’m referring to the cycle detectors, the first CSP algorithms I ever studied (My Papers [1,4]).

Continue reading “The Cycle Detectors”

Radio-Frequency Scene Analysis

Modulation recognition is one thing, holistic radio-frequency scene analysis is quite another.

Update October 2023: RFSA is a Wicked Problem.

So why do I obsess over cyclostationary signals and cyclostationary signal processing? What’s the big deal, in the end? In this post I discuss my view of the ultimate use of cyclostationary signal processing (CSP): Radio-Frequency Scene Analysis (RFSA). Eventually, I hope to create a kind of Star Trek Tricorder for RFSA.

Continue reading “Radio-Frequency Scene Analysis”

Cyclic Temporal Cumulants

Cyclic cumulants are the amplitudes of the Fourier-series components of the time-varying cumulant function for a cyclostationary signal. They degenerate to conventional cumulants when the signal is stationary.

In this post I continue the development of the theory of higher-order cyclostationarity (My Papers [5,6]) that I began here. It is largely taken from my doctoral work (download my dissertation here).

This is a long post. To make it worthwhile, I’ve placed some movies of cyclic-cumulant estimates at the end. Or just skip to the end now if you’re impatient!

In my work on cyclostationary signal processing (CSP), the most useful tools are those for estimating second-order statistics, such as the cyclic autocorrelation, spectral correlation function, and spectral coherence function. However, as we discussed in the post on Textbook Signals, there are some situations (perhaps only academic; see my question in the Textbook post) for which higher-order cyclostationarity is required. In particular, a probabilistic approach to blind modulation recognition for ideal (textbook) digital QAM, PSK, and CPM requires higher-order cyclostationarity because such signals have similar or identical spectral correlation functions and PSDs. (Other high-SNR non-probabilistic approaches can still work, such as blind constellation extraction.)

Recall that in the post introducing higher-order cyclostationarity, I mentioned that one encounters a bit of a puzzle when attempting to generalize experience with second-order cyclostationarity to higher orders. This is the puzzle of pure sine waves (My Papers [5]). Let’s look at pure and impure sine waves, and see how they lead to the probabilistic parameters widely known as cyclic cumulants.

Continue reading “Cyclic Temporal Cumulants”

A Gallery of Spectral Correlation

Pictures are worth N words, and M equations, where N and M are large integers.

In this post I provide plots of the spectral correlation for a variety of simulated textbook signals and several captured communication signals. The plots show the variety of cycle-frequency patterns that arise from the disparate approaches to digital communication signaling. The distinguishability of these patterns, combined with the inability to distinguish based on the power spectrum, leads to a powerful set of classification (modulation recognition) features (My Papers [16, 25, 26, 28]).

In all cases, the cycle frequencies are blindly estimated by the strip spectral correlation analyzer (The Literature [R3, R4]) and the estimates used by the FSM to compute the spectral correlation function. MATLAB is then used to plot the magnitude of the spectral correlation and conjugate spectral correlation, as specified by the determined non-conjugate and conjugate cycle frequencies.

There are three categories of signal types in this gallery: textbook signals, captured signals, and feature-rich signals. The latter comprises some captured signals (e.g., LTE) and some simulated radar signals. For the first two signal categories, the three-dimensional surface plots I’ve been using will suffice for illustrating the cycle-frequency patterns and the behavior of the spectral correlation function over frequency. But for the last category, the number of cycle frequencies is so large that the three-dimensional surface is difficult to interpret–it is a visual mess. For these signals, I’ll plot the maximum spectral correlation magnitude over spectral frequency f versus the detected cycle frequency \alpha (as in this post).

A complementary gallery of cyclic autocorrelation functions can be found here.

Continue reading “A Gallery of Spectral Correlation”

Textbook Signals

Yes, the CSP Blog uses the simplest idealized cyclostationary digital signal–rectangular-pulse BPSK–to connect all the different aspects of CSP. But don’t mistake these ‘textbook’ signals for the real world.

What good is having a blog if you can’t offer a rant every once in a while? In this post I talk about what I call textbook signals, which are mathematical models of communication signals that are used by many researchers in statistical signal processing for communications.

We’ve already encountered, and used frequently, the most common textbook signal of all: rectangular-pulse BPSK with independent and identically distributed (IID) bits. We’ve been using this signal to illustrate the cyclostationary signal processing concepts and estimators as they have been introduced. It’s a good choice from the point of view of consistency of all the posts and it is easy to generate and to understand. However, it is not a good choice from the perspective of realism. It is rare to encounter a textbook BPSK signal in the practice of signal processing for communications.

I use the term textbook because the textbook signals can be found in standard textbooks, such as Proakis (The Literature [R44]). Textbook signals stand in opposition to signals used in the world, such as OFDM in LTE, slotted GMSK in GSM, 8PAM VSB with synchronization bits in ATSC-DTV, etc.

Typical communication signals combine a textbook signal with an access mechanism to yield the final physical-layer signal–the signal that is actually transmitted (My Papers [11], [16]). What is important for us, here at the CSP Blog, is that this combination usually results in a signal with radically different cyclostationarity than the textbook component. So it is not enough to understand textbook signals’ cyclostationarity. We must also understand the cyclostationarity of the real-world signal, which may be sufficiently complex to render mathematical modeling and analysis impossible (at least for me). (See also some relevant examples of real-world signals here and here.)

Continue reading “Textbook Signals”

SCF Estimate Quality: The Resolution Product

What factors influence the quality of a spectral correlation function estimate?

The two non-parametric spectral-correlation estimators we’ve looked at so far–the frequency-smoothing and time-smoothing methods–require the choice of key estimator parameters. These are the total duration of the processed data block, T, and the spectral resolution F.

For the frequency-smoothing method (FSM), an FFT with length equal to the data-block length T is required, and the spectral resolution is equal to the width F of the smoothing function g(f). For the time-smoothing method (TSM), multiple FFTs with lengths T_{tsm} = T / K are required, and the frequency resolution is 1/T_{tsm} (in normalized frequency units).

The choice for the block length T is partially guided by practical concerns, such as computational cost and whether the signal is persistent or transient in nature, and partially by the desire to obtain a reliable (low-variance) spectral correlation estimate. The choice for the frequency (spectral) resolution is typically guided by the desire for a reliable estimate.

Continue reading “SCF Estimate Quality: The Resolution Product”

The Spectral Coherence Function

Cross correlation functions can be normalized to create correlation coefficients. The spectral correlation function is a cross correlation and its correlation coefficient is called the coherence.

In this post I introduce the spectral coherence function, or just coherence. It deserves its own post because the coherence is a useful detection statistic for blindly determining significant cycle frequencies of arbitrary data records. See the posts on the strip spectral correlation analyzer and the FFT accumulation method for examples.

Let’s start with reviewing the standard correlation coefficient \rho defined for two random variables X and Y as

\rho = \displaystyle \frac{E[(X - m_X)(Y - m_Y)]}{\sigma_X \sigma_Y}, \hfill (1)

where m_X and m_Y are the mean values of X and Y, and \sigma_X and \sigma_Y are the standard deviations of X and Y. That is,

m_X = E[X] \hfill (2)

m_Y = E[Y] \hfill (3)

\sigma_X^2 = E[(X-m_X)^2] \hfill (4)

\sigma_Y^2 = E[(Y-m_Y)^2] \hfill (5)

So the correlation coefficient is the covariance between X and Y divided by the geometric mean of the variances of X and Y.

Continue reading “The Spectral Coherence Function”

CSP Estimators: The Time Smoothing Method

The non-blind spectral-correlation estimator called the TSM is favored when one wishes to avoid long FFTs.

In a previous post, we introduced the frequency-smoothing method (FSM) of spectral correlation function (SCF) estimation. The FSM convolves a pulse-like smoothing window g(f) with the cyclic periodogram to form an estimate of the SCF. An advantage of the method is that it allows fine control over the spectral resolution of the SCF estimate through the choice of g(f), but the drawbacks are that it requires a Fourier transform as long as the data-record undergoing processing, and the convolution can be expensive. However, the expense of the convolution can be mitigated by using rectangular g(f).

In this post, we introduce the time-smoothing method (TSM) of SCF estimation. Instead of averaging (smoothing) the cyclic periodogram over spectral frequency, multiple cyclic periodograms are averaged over time. When the non-conjugate cycle frequency of zero is used, this method produces an estimate of the power spectral density, and is essentially the Bartlett spectrum estimation method. The TSM can be found in My Papers [6] (Eq. (54)), and other places in the literature.

Continue reading “CSP Estimators: The Time Smoothing Method”

CSP Estimators: The Frequency-Smoothing Method

The non-blind spectral-correlation estimator called the FSM is favored when one wishes to have fine control over frequency resolution and can tolerate long FFTs.

In this post I describe a basic estimator for the spectral correlation function (SCF): the frequency-smoothing method (FSM). The FSM is a way to estimate the SCF for a single value of cycle frequency. Recall from the basic theory of the cyclic autocorrelation and SCF that the SCF is obtained by infinite-time averaging of the cyclic periodogram or by infinitesimal-resolution frequency averaging of the cyclic periodogram. The FSM is merely a finite-time/finite-resolution approximation to the SCF definition.

One place the FSM can be found is in (My Papers [6]), where I introduce time-smoothed and frequency-smoothed higher-order cyclic periodograms as estimators of the cyclic polyspectrum. When the cyclic polyspectrum order is set to n = 2, the cyclic polyspectrum becomes the spectral correlation function, so the FSM discussed in this post is just a special case of the more general estimator in [6, Section VI.B].

Continue reading “CSP Estimators: The Frequency-Smoothing Method”

Signal Selectivity

We can estimate the spectral correlation function of one signal in the presence of another with complete temporal and spectral overlap provided the signal has a unique cycle frequency.

In this post I describe and illustrate the most important property of cyclostationary statistics: signal selectivity. The idea is that the cyclostationary parameters for a single signal can be estimated for that signal even when it is corrupted by strong noise and cochannel interferers. ‘Cochannel’ means that the interferer occupies a frequency band that partially or completely overlaps the frequency band for the signal of interest.

A mixture of received RF signals, whether cochannel or not, is accurately modeled by the simple sum of the signals, as in

x(t) = s_1(t) + s_2(t) + \ldots + s_K(t) + w(t), \hfill (1)

where w(t) is additive noise. We can write this more compactly as

x(t) = \displaystyle \sum_{k=1}^K s_k(t) + w(t). \hfill (2)

Continue reading “Signal Selectivity”