Another RF-signal dataset to help push along our R&D on modulation recognition.
Update October 2023: A flaw in the way a random-number generator was used to create CSPB.ML.2022 (and CSPB.ML.2018) has led me to recreate the dataset and post it here. It is called CSPB.ML.2022R2.
Update February 2023: A third dataset has been posted to the CSP Blog: CSPB.ML.2023. It features cochannel signals.
Update January 2023: I’m going to put Challenger results in the Comments. I’ve received a Challenger’s decisions and scored them in January 2023. See below.
In this post I provide a second dataset for the Machine-Learning Challenge I issued in 2018 (CSPB.ML.2018). This dataset is similar to the original dataset, but possesses a key difference in that the probability distribution of the carrier-frequency offset parameter, viewed as a random variable, is not the same, but is still realistic.
Blog Note: By WordPress’ count, this is the 100th post on the CSP Blog. Together with a handful of pages (like My Papers and The Literature), these hundred posts have resulted in about 250,000 page views. That’s an average of 2,500 page views per post. However, the variance of the per-post pageviews is quite large. The most popular is The Spectral Correlation Function (> 16,000) while the post More on Pure and Impure Sinewaves, from the same era, has only 316 views. A big Thanks to all my readers!!
We take a quick look at a fourth DeepSig dataset called 2016.04C.multisnr.tar.bz2 in the context of the data-shift problem in machine learning.
And if we get this right,
We’re gonna teach ’em how to say
You and I.
Lin-Manuel Miranda, “One Last Time,” Hamilton
I didn’t expect to have to do this, but I am going to analyze yet another DeepSig dataset. One last time. This one is called 2016.04C.multisnr.tar.bz2, and is described thusly on the DeepSig website:
I’ve analyzed the 2018 dataset here, the RML2016.10b.tar.bz2 dataset here, and the RML2016.10a.tar.bz2 dataset here.
Now I’ve come across a manuscript-in-review in which both the RML2016.10a and RML2016.04c data sets are used. The idea is that these two datasets represent two sufficiently distinct datasets so that they are good candidates for use in a data-shift study involving trained neural-network modulation-recognition systems.
The data-shift problem is, as one researcher puts it:
Data shift or data drift, concept shift, changing environments, data fractures are all similar terms that describe the same phenomenon: the different distribution of data between train and test sets
An interesting paper on the true nature of the impulse function we use so much in signal processing.
The impulse function, also called the Dirac delta function, is commonly used in statistical signal processing, and on the CSP Blog (examples: representations and transforms). I think we’re a bit casual about this usage, and perhaps none of us understand impulses as well as we might.
A colleague has started up a website with lots of content on digital signal processing: Wave Walker DSP. This is, to me, a new kind of engineering blog in that it blends DSP mathematics and practice with philosophy. That’s an intriguing complement to my engineering blog, which I view as blending DSP mathematics with criticism.
What are the ranges of spectral frequency and cycle frequency that we need to consider in a discrete-time/discrete-frequency setting for CSP?
Let’s talk about that diamond-shaped region in the plane we so often see associated with CSP. I’m talking about the principal domain for the discrete-time/discrete-frequency spectral correlation function. Where does it come from? Why do we care? When does it come up?
The Fast Spectral Correlation estimator is a quick way to find small cycle frequencies. However, its restrictions render it inferior to estimators like the SSCA and FAM.
Update 2023: I continue with critical analysis of Antoni’s work as applied to ‘using and understanding the statistics of communication signals‘ in a follow-on post.
In this post we take a look at an alternative CSP estimator created by J. Antoni et al (The Literature [R152]). The paper describing the estimator can be found here, and you can get some corresponding MATLAB code, posted by the authors, here if you have a Mathworks account.
The merging of conventional probability theory with signal theory leads to random processes, also known as stochastic processes. The ideas involved with random processes are central to cyclostationary signal processing.
In this Signal Processing ToolKit post, I provide an introduction to the concept and use of random processes (also called stochastic processes). This is my perspective on random processes, so although I’ll introduce and use the conventional concepts of stationarity and ergodicity, I’ll end up focusing on the differences between stationary and cyclostationary random processes. The goal is to illustrate those differences with informative graphics and videos; to build intuition in the reader about how the cyclostationarity property comes about, and about how the property relates to the more abstract mathematical object of a random process on one hand and to the concrete data-centric signal on the other.
So … this is the first SPTK post that is also a CSP post.
Does the use of ‘total SNR’ mislead when the fractional bandwidth is very small? What constitutes ‘weak-signal processing?’
Or maybe “Comments on” here should be “Questions on.”
In a recent paper in EURASIP Journal on Advances in Signal Processing (The Literature [R165]), the authors tackle the problem of machine-learning-based modulation recognition for highly oversampled rectangular-pulse digital signals. They don’t use the DeepSig datasets (one, two, three, four), but their dataset description and use of ‘signal-to-noise ratio’ leaves a lot to be desired. Let’s take a brief look. See if you agree with me that the touting of their results as evidence that they can reliably classify signals with ‘SNRs of dB’ is unwarranted and misleading.
In this Signal Processing ToolKit post, we continue our exploration of random variables. Here we look at specific examples of random variables, which means that we focus on concrete well-defined cumulative distribution functions (CDFs) and probability density functions (PDFs). Along the way, we show how to use some of MATLAB’s many random-number generators, which are functions that produce one or more instances of a random variable with a specified PDF.
Just a reminder that if you are getting some value out of the CSP Blog, I would appreciate it if you could make a donation to offset my costs: I do pay WordPress to keep ads off the site! I also pay extra for a class of service that allows me to post large data sets like the one for the Machine-Learner Challenge.
If everyone that derived value from the CSP Blog were to donate $5, I’d have enough leftover for at least a couple cups of fancy coffee.
In signal processing, and in CSP, we often have to convert real-valued data into complex-valued data and vice versa. Real-valued data is in the real world, but complex-valued data is easier to process due to the use of a substantially lower sampling rate.
In this Signal-Processing Toolkit post, we review the signal-processing steps needed to convert a real-valued sampled-data bandpass signal to a complex-valued sampled-data lowpass signal. The former can arise from sampling a signal that has been downconverted from its radio-frequency spectral band to a much lower intermediate-frequency spectral band. So we want to convert such data to complex samples at zero frequency (‘complex baseband’) so we can decimate them and thereby match the sample rate to the signal’s baseband bandwidth. Subsequent signal-processing algorithms (including CSP of course) can then operate on the relatively low-rate complex-envelope data, which is beneficial because the same number of seconds of data can be processed using fewer samples, and computational cost is determined by the number of samples, not the number of seconds.
We continue our basic signal-processing posts with one on the moving-average, or smoothing, filter. The moving-average filter is a linear time-invariant operation that is widely used to mitigate the effects of additive noise and other random disturbances from a presumably well-behaved signal. For example, a physical phenomenon may be producing a signal that increases monotonically over time, but our measurement of that signal is corrupted by noise, interference, or flaws in the measurement process. The moving-average filter can reveal the sought-after trend by suppressing the effects of the unwanted disturbances.
Why does zero-padding help in various estimators of the spectral correlation and spectral coherence functions?
Update to the exchange: May 7, 2021.May 14, 2021.
Reader Clint posed a great question about zero-padding in the frequency-smoothing method (FSM) of spectral correlation function estimation. The question prompted some pondering on my part, and I went ahead and did some experiments with the FSM to illustrate my response to Clint. The exchange with Clint (ongoing!) was deep and detailed enough that I thought it deserved to be seen by other CSP-Blog readers. One of the problems with developing material, or refining explanations, in the Comments sections of the CSP Blog is that these sections are not nearly as visible in the navigation tools featured on the Blog as are the Posts and Pages.
Let’s take a brief look at the cyclostationarity of a captured DMR signal. It’s more complicated than one might think.
In this post I look at the cyclostationarity of a digital mobile radio (DMR) signal empirically. That is, I have a captured DMR signal from sigidwiki.com, and I apply blind CSP to it to determine its cycle frequencies and spectral correlation function. The signal is arranged in frames or slots, with gaps between successive slots, so there is the chance that we’ll see cyclostationarity due to the on-burst (or on-frame) signaling and cyclostationarity due to the framing itself.
We continue with our non-CSP signal-processing tool-kit series with this post on ideal filtering. Ideal filters are those filters with transfer functions that are rectangular, step-function-like, or combinations of rectangles and step functions.
Another post-publication review of a paper that is weak on the ‘RF’ in RF machine learning.
Let’s take a look at a recently published paper (The Literature [R148]) on machine-learning-based modulation-recognition to get a data point on how some electrical engineers–these are more on the side of computer science I believe–use mathematics when they turn to radio-frequency problems. You can guess it isn’t pretty, and that I’m not here to exalt their acumen.
Spectral correlation surfaces for real-valued and complex-valued versions of the same signal look quite different.
In the real world, the electromagnetic field is a multi-dimensional time-varying real-valued function (volts/meter or newtons/coulomb). But in mathematical physics and signal processing, we often use complex-valued representations of the field, or of quantities derived from it, to facilitate our mathematics or make the signal processing more compact and efficient.
So throughout the CSP Blog I’ve focused almost exclusively on complex-valued signals and data. However, there is a considerable older literature that uses real-valued signals, such as The Literature [R1, R151]. You can use either real-valued or complex-valued signal representations and data, as you prefer, but there are advantages and disadvantages to each choice. Moreover, an author might not be perfectly clear about which one is used, especially when presenting a spectral correlation surface (as opposed to a sequence of equations, where things are often more clear).
This installment of the Signal Processing Toolkit series of CSP Blog posts deals with the ubiquitous signal-processing operation known as convolution. We originally came across it in the context of linear time-invariant systems. In this post, we focus on the mechanics of computing convolutions and discuss their utility in signal processing and CSP.